777午夜福利理论电影网,亚洲色偷偷色噜噜狠狠99网,精品久久久久久久免费人妻,国产办公室沙发系列高清

 
         
    Home Contact us ÖŠĪÄ°ę
Home About us News Products Honors Feedback Contact us  
     Wellhead
     X-mas Tree
     valve
     Tube remit
     bop
     Casting products
     reducer
     Safety valve
 
 
 
YANCHENG SHENHUA MACHINERY MANUFACTURE CO.,LTD
Add:No. 1299, Jianhu Avenue South Road, Jianhu County
Tel:+86£­515£­86500588
    86500699
Fax:+86£­515£­86500599
    86500699
zip:224761
Email:zxw@ycshenhua.com
You are the location  >> Shenghua Machinaty manufacture Co.,Ltd >> Product    
 
   
  Structure instruction Detailed parameter  
””””The product is designed and manufactured according to API Spec 6A "quipment Specification of Wellhead &X' as tree" and matched and interchangeable with any equipment which conforms to API 6A specification.
””””It creates the metal-to-metal seal by the pressure of the medium, the more the pressure is, the better the sealing effect is. Anytime the valve chamber can bear the pressure of the pipeline.
””””Valve body is machined of alloy steal forging with a stronger machinery properties and reliable performance.
””””Bonnet is connected with valve body with bolt, the seals include the sealing ring in the bonnet and the seal in the valve body, which has redure the assembly clearance up to O as designed, so it decreases the corrosion against bolt and bolt hole from acid medium as well as bolt loading.
””””The sealing face between valve core and valve body is welded with hard alloy with good abrasion resistance and anti-scour ; the valve core is made of sulfide-resistance steal and the others adopt the process of hardness  limit so the valve is able to be used in H2S condition.
””””Operation instruction
    According to medium flow direction and by the flow direction indicating plate of  the valve, the valve is installed. As positive flowing, The medium lifts the valve core and pass easily; If no positive medium pressure, valve core will self-shut off valve gate under self-weight and spring? tensile force, the back medium flowing stop.
    Maintenances
    The valve should be placed in the dry and airy room, and the inlet and outlet are sealed properly.
    When the product is stored , the end flanges should be coated by oil against rust and dirt pollution.
    The valve-core and the valve-seat must be examined every in a well time. The attrition rate will decide whether they are used by upset or are replaced.
    Every seal element is replaced according to its examination.
    There is a bit leak at a couple of seals of valve, and the sealing-face may have scratch or wear. Renovation will be done under face-off and ground finish.
    As leak appears at the middle one of the valve bores, ring gasket should be replaced.

 
 
Home | About us | News | Products | Honors | Feedback | Contact us 
COPYRIGHT[C]2011 YANCHENG SHENHUA    ALL RIGHTS RESERVES